New

DYNAMIXEL AX-18A

In stock
can be shipped within 14 days

100.00
Price without VAT or delivery
Delivery weight: 55 g


Minimum order value for Dynamixel products is 500€ !!! Please contact us for smaller quantities.

 

Description

  • The AX-18A has a bigger Stall Torque than the AX-12A. So if you want to boost your performance replace all AX-12A or simply just those at the joints with a too small torque by the AX-18A.
  • Contains No. 4 metal gear to enhance endurance
  • For safe usage maintain the highest limit temperature at the default value

 

Content

Description

Quantity

DYNAMIXEL

 AX-18A

1

HORN

 AX-HORN

1/assembled

FRAME

 BPF-WA/BU Set

1

CABLE

 3P Cable 200mm

1

BOLT/NUT

 Bolt PHS M2x6

16

 Bolt BHS M3x10

1

 N1 NUT M2

16

 

Hardware Specifications

 Product name

 DYNAMIXEL AX-18A

 Weight

 54.6g

 Dimension

 32mm x 50mm x 40mm

 Gear Ratio

 254 : 1

 Operation Voltage (V)

 12

 Stall Torque (N.m)

 1.8 (12V)

 Stall Current (A)

 2.2

 No Load Speed (RPM)

 97 (12V)

 Motor

 Coreless Motor

 Minimum Control Angle

 About 0.29° x 1,024

 Operating Range

 Actuator Mode : 300°

 Wheel Mode : Endless turn

 Operating Voltage

 9~12V (Recommended voltage : 11.1V)

 Operating Temperature

 -5°C ~ 70°C

 Command Signal

 Digital Packet

 Protocol

 Half duplex Asynchronous Serial Communication

 (8 bit, 1 stop, No Parity)

 Link (physical)

 TTL Level Multi Drop (daisy chain type Connector)

 ID

 254 ID (0~253)

 Baud Rate

 7843bps ~ 1 Mbps

 Feedback Functions

 Position, Temperature, Load, Input Voltage, etc.

 Material

 Case : Engineering Plastic

 Gear : Engineering Plastic + Metal (Gear #4)

 Position Sensor

 Potentiometer

 Default Setting

 ID #1 (1 Mbps)

 Compatible Products

 Click : Compatibility Chart

 Drawings

 Click : 2D and 3D

 e-Manual

 Click : e-Manual

 

Frame Purchase Guide

  • The old horns are only compatible with the old frames and the new horns are only compatible with the new frames.
  • If you are using the OLD horns, you MUST purchase the OLD frames. If you are using the NEW horns, you MUST purchase the NEW frames.
  • If you are using OLD horns, but want to use new frames, you MUST use both NEW horns and NEW frames.

EXAMPLE: If you are using the RX-64 HN05-N1 Set(Horn Rx-64), you must purchase the RX-64 FR05-H1 Set(OF-RX64H Set).

 

Controlling Environment

  • Software for Dynamixel control : ROBOPLUS - Download
  • C/C++, C#, Labview, MATLAB, Visual Basic : Library – Download
Browse this category: AX-Serie